IT-Passports.comのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522には何か品質問題があることを見つければ、あるいは試験に合格しなかったのなら、弊社が無条件で全額返金することを約束します。IT-Passports.comは専門的にJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験の最新問題と解答を提供するサイトで、JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522についての知識をほとんどカバーしています。
IT-Passports.comは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
JuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522の認定試験証明書を取りたいなら、IT-Passports.comが貴方達を提供した資料をかったら、お得です。ass4Testはもっぱら認定試験に参加するIT業界の専門の人士になりたい方のために模擬試験の練習問題と解答を提供した評判の高いサイトでございます。
IT-Passports.comのJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522認証試験について最新な研究を完成いたしました。無料な部分ダウンロードしてください。きっと君に失望させないと信じています。最新JuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522認定試験は真実の試験問題にもっとも近くて比較的に全面的でございます。
試験番号：JN0-332問題集
試験科目：Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」
問題と解答：全406問
試験番号：JN0-101問題集
試験科目：Juniper 「JNCIA-JUNOS EXAM OBJECTIVES」
問題と解答：全190問
試験番号：JN0-360問題集
試験科目：Juniper 「Juniper Networks Certified Internet Specialist (JNCIS-SP)」
問題と解答：全143問
試験番号：JN0-343問題集
試験科目：Juniper 「Juniper Networks Certified Internet Specialist (JNCIS-ENT)」
問題と解答：全393問
試験番号：JN0-331問題集
試験科目：Juniper 「SEC,Specialist(JNCIS-SEC)」
問題と解答：全131問
試験番号：JN0-522問題集
試験科目：Juniper 「FXV,Associate (JNCIA-FWV)」
問題と解答：全160問
Pass4のJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験トレーニング資料を利用したら、最新のJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522認定試験の問題と解答を得られます。そうしたらPass4のJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験に合格することができるようになります。Pass4のJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験に合格することはあなたのキャリアを助けられて、将来の異なる環境でチャンスを与えます。Pass4のJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験トレーニング資料はあなたが完全に問題と問題に含まれているコンセプトを理解できることを保証しますから、あなたは気楽に一回で試験に合格することができます。
IT-Passports.com JuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験スタディガイドはあなたのキャリアの灯台になれます。IT-Passports.comは全ての受かるべきJN0-332 JN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験を含めていますから、Pass4を利用したら、あなたは試験に合格することができるようになります。これは絶対に賢明な決断です。恐い研究の中から逸することができます。IT-Passports.comがあなたのヘルパーで、IT-Passports.comを手に入れたら、半分の労力でも二倍の効果を得ることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/JN0-343.html
NO.1 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper練習問題 JN0-343認定資格 JN0-343認定資格
NO.2 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343認定証 JN0-343認定試験 JN0-343
NO.3 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper認定資格 JN0-343認定資格 JN0-343問題集
NO.4 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper参考書 JN0-343 JN0-343過去問 JN0-343認定資格 JN0-343
NO.5 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper JN0-343認証試験 JN0-343
NO.6 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper認定資格 JN0-343練習問題 JN0-343 JN0-343認定資格
NO.7 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper認証試験 JN0-343過去問 JN0-343問題集
NO.8 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper練習問題 JN0-343 JN0-343認定証 JN0-343練習問題 JN0-343参考書 JN0-343過去問
NO.9 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper過去問 JN0-343 JN0-343 JN0-343
NO.10 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper練習問題 JN0-343 JN0-343問題集 JN0-343 JN0-343 JN0-343認証試験
NO.11 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper練習問題 JN0-343 JN0-343問題集 JN0-343練習問題 JN0-343
NO.12 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper過去問 JN0-343練習問題 JN0-343 JN0-343練習問題 JN0-343 JN0-343問題集
NO.13 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343認定試験 JN0-343認定資格
NO.14 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343 JN0-343参考書
NO.15 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper JN0-343認定証 JN0-343
NO.16 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper参考書 JN0-343 JN0-343 JN0-343
NO.17 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343認証試験 JN0-343 JN0-343 JN0-343
NO.18 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper問題集 JN0-343 JN0-343 JN0-343
NO.19 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343認定試験 JN0-343 JN0-343
NO.20 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper認定証 JN0-343認定証 JN0-343 JN0-343
NO.21 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper認証試験 JN0-343 JN0-343練習問題 JN0-343認定試験 JN0-343
NO.22 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper認定資格 JN0-343認定証 JN0-343認証試験
NO.23 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper認定資格 JN0-343 JN0-343 JN0-343認証試験
NO.24 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper練習問題 JN0-343 JN0-343認定試験 JN0-343
NO.25 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343認証試験 JN0-343認証試験
NO.26 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper JN0-343 JN0-343 JN0-343
NO.27 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 JN0-343 JN0-343 JN0-343
NO.28 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper JN0-343 JN0-343過去問 JN0-343 JN0-343認証試験
NO.29 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper練習問題 JN0-343認証試験 JN0-343 JN0-343練習問題 JN0-343認証試験
NO.30 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper JN0-343 JN0-343認定試験
没有评论:
发表评论