IT-Passports.comが提供した対応性の訓練問題をテストにして初めてSymantecのST0-10X認定試験に参加する受験者の最もよいな選択でございます。真実試験問題が似てるのを確保することができて一回合格するのは目標にしています。もし試験に失敗したら、弊社が全額で返金いたします。
どうしてIT-Passports.comのSymantecのST0-10X試験トレーニング資料はほかのトレーニング資料よりはるかに人気があるのでしょうか。それはいくつかの理由があります。第一、IT-Passports.comは受験生の要求をよく知っています。しかも、他のどのサイトよりも良いサービスを提供します。第二、専心すること。我々が決まったことを完璧に作るためにすべての不要な機会を諦めなければなりません。第三、我々は確かに最高の製品を持っていますが、粗悪品の方式で表示されたら、もちろん粗悪品と見られますから、我々は自分の製品を創造的かつプロの方法で見せます。IT-Passports.comのSymantecのST0-10X試験トレーニング資料はこんなに成功するトレーニングですから、IT-Passports.comを選ばない理由はないです。
試験番号：ST0-10X問題集
試験科目：Symantec 「Veritas Storage Foundation 5 for Unix (STS)」
問題と解答：全198問
IT-Passports.comのIT業界専門家チームは彼らの経験と知識を利用して絶えないな試験対策材料の品質を高めて、受験者の需要を満たして、受験者のはじめてSymantec ST0-10X試験を順調に合格するを保証します。あなた達はIT-Passports.comの商品を購入してもっともはやく正確に試験に関する情報を手に入れます。IT-Passports.comの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。
IT-Passports.comが提供したSymantecのST0-10X試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/ST0-10X.html
NO.1 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C
Symantec参考書 ST0-10X認証試験 ST0-10X ST0-10X
NO.2 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C
Symantec問題集 ST0-10X練習問題 ST0-10X ST0-10X認定試験
NO.3 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD
Symantec問題集 ST0-10X認定証 ST0-10X認定証 ST0-10X
NO.4 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A
Symantec ST0-10X練習問題 ST0-10X ST0-10X ST0-10X認定証
NO.5 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D
Symantec ST0-10X ST0-10X認定証 ST0-10X ST0-10X認証試験
NO.6 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B
Symantec参考書 ST0-10X ST0-10X ST0-10X ST0-10X
NO.7 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B
Symantec問題集 ST0-10X ST0-10X
NO.8 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B
Symantec練習問題 ST0-10X認定証 ST0-10X認定資格 ST0-10X参考書
NO.9 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD
Symantec認定資格 ST0-10X ST0-10X認定資格 ST0-10X過去問 ST0-10X練習問題
NO.10 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D
Symantec ST0-10X認定試験 ST0-10X参考書
NO.11 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A
Symantec練習問題 ST0-10X参考書 ST0-10X ST0-10X ST0-10X
NO.12 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C
Symantec ST0-10X ST0-10X ST0-10X認証試験
NO.13 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D
Symantec認定証 ST0-10X ST0-10X ST0-10X
NO.14 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B
Symantec認定証 ST0-10X ST0-10X
NO.15 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B
Symantec ST0-10X ST0-10X認定試験 ST0-10X認定資格
NO.16 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B
Symantec認定試験 ST0-10X認定試験 ST0-10X ST0-10X問題集 ST0-10X ST0-10X
NO.17 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C
Symantec ST0-10X ST0-10X ST0-10X ST0-10X
NO.18 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B
Symantec練習問題 ST0-10X ST0-10X認証試験 ST0-10X ST0-10X ST0-10X認証試験
NO.19 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B
Symantec練習問題 ST0-10X ST0-10X参考書
NO.20 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE
Symantec ST0-10X認定証 ST0-10X ST0-10X認定試験 ST0-10X練習問題
難しいIT認証試験に受かることを選んだら、頑張って準備すべきです。IT-Passports.comのSymantecのST0-10X試験トレーニング資料はIT認証試験に受かる最高の資料で、手に入れたら成功への鍵を持つようになります。IT-Passports.comのSymantecのST0-10X試験トレーニング資料は信頼できるもので、１００パーセントの合格率を保証します。
没有评论:
发表评论