Oracleの1Z0-055認定試験は人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生は1Z0-055認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。
IT-Passports.comはOracleの1Z0-055認定試験に便利なサービスを提供するサイトで、従来の試験によってIT-Passports.com が今年のOracleの1Z0-055認定試験を予測してもっとも真実に近い問題集を研究し続けます。
試験番号：1Z0-055問題集
試験科目：Oracle 「Oracle Database 11g: New Features for 9i OCPs」
問題と解答：全150問
もう既にOracleの1Z0-055認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはIT-Passports.comの1Z0-055問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、1Z0-055認定試験に合格することができます。
IT-Passports.comはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はIT-Passports.comが最高の知識源サイトと比較しますた。IT-Passports.comの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。
われわれは今の競争の激しいIT社会ではくつかIT関連認定証明書が必要だとよくわかります。IT専門知識をテストしているOracleの1Z0-055認定試験は1つのとても重要な認証試験でございます。しかしこの試験は難しさがあって、合格率がずっと低いです。でもIT-Passports.comの最新問題集がこの問題を解決できますよ。1Z0-055認定試験の真実問題と模擬練習問題があって、十分に試験に合格させることができます。
IT-Passports.comのウェブサイトをクリックしたら、IT-Passports.comに登録した人々が非常にたくさんいることに驚いたでしょう。実はこれは普通なことです。IT-Passports.comは毎日異なる受験生に様々なトレーニング資料を提供します。彼らは当社の資料を利用してから試験に受かりました。これは当社が提供したOracleの1Z0-055トレーニング資料が本当に効果的なものということを証明しました。もしあなたも試験に合格したいのなら、IT-Passports.comをミスしないでください。IT-Passports.comはきっとあなたのニーズを満たせますから。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/1Z0-055.html
NO.1 Which are the prerequisites for performing flashback transactions on your database? (Choose all that
apply.)
A. Supplemental log must be enabled.
B. Supplemental log must be enabled for the primary key.
C. Undo retention guarantee for the database must be configured.
D. Execute permission on the DBMS_FLASHBACK package must be granted to the user.
Answer: ABD
Oracle 1Z0-055 1Z0-055認定試験 1Z0-055 1Z0-055 1Z0-055過去問
NO.2 Examine the following PL/SQL block:
SET SERVEROUTPUT ON
SET LONG 10000
DECLARE report clob;
BEGIN
report := DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE();
DBMS_OUTPUT.PUT_LINE(report);
END;
Which statement describes the effect of the execution of the above PL/SQL block?
A. The plan baselines are verified with the SQL profiles.
B. All fixed plan baselines are converted into nonfixed plan baselines.
C. All the nonaccepted SQL profiles are accepted into the plan baseline.
D. The nonaccepted plans in the SQL Management Base are verified with the existing plan baselines.
Answer: D
Oracle 1Z0-055 1Z0-055認証試験 1Z0-055
NO.3 Which method would you use to undo the changes made by a particular transaction without affecting
the changes made by other transactions?
A. point-in-time recovery
B. execute the ROLLBACK command with transaction number
C. flashback the database to before the transaction was committed
D. determine all the necessary undo SQL statements from FLASHBACK_TRANSACTION_QUERY and
use them for recovery
Answer: D
Oracle 1Z0-055認定試験 1Z0-055参考書 1Z0-055問題集 1Z0-055
NO.4 Which of the following information will be gathered by the SQL Test Case Builder for the problems
pertaining to SQL-related problems? (Choose all that apply.)
A. ADR diagnostic files
B. all the optimizer statistics
C. initialization parameter settings
D. PL/SQL functions, procedures, and packages
E. the table and index definitions and actual data
Answer: BCE
Oracle練習問題 1Z0-055 1Z0-055 1Z0-055
NO.5 View the Exhibit exhibit1.
In the CUSTOMERS_OBE table, when the value of CUST_STATE_PROVINCE is "CA", the value of
COUNTRY_ID is "US"
View the Exhibit exhibit2 to examine the commands and query plans.
The optimizer can sense 8 rows instead of 29 rows, which is the actual number of rows in the table. What
can you do to make the optimizer detect the actual selectivity?
A. Set the STATISTICS_LEVEL parameter to TYPICAL.
B. Change the STALE_PERCENT value for the CUSTOMERS_OBE table.
C. Set the OPTIMIZER_USE_PENDING_STATISTICS parameter to FALSE.
D. Create extended statistics for the CUST_STATE_PROVINCE and COUNTRY_ID columns.
Answer: D
Oracle問題集 1Z0-055 1Z0-055認証試験 1Z0-055 1Z0-055認定証
NO.6 View the Exhibit to examine the error during the database startup.
You open an RMAN session for the database instance. To repair the failure, you executed the following as
the first command in the RMAN session:
RMAN> REPAIR FAILURE;
Which statement describes the consequence of the command?
A. The command performs the recovery and closes the failures.
B. The command only displays the advice and the RMAN script required for repair.
C. The command produces an error because the ADVISE FAILURE command has not been executed
before the REPAIR FAILURE command.
D. The command executes the RMAN script to repair the failure and removes the entry from the
Automatic Diagnostic Repository (ADR).
Answer: C
Oracle 1Z0-055 1Z0-055認定証 1Z0-055
NO.7 You issued the following command:
CREATE GLOBAL TEMPORARY TABLE admin_work_area
(startdate DATE,
enddate DATE,
class CHAR(20))
ON COMMIT DELETE ROWS
TABLESPACE tbs_t1;
An index is then created on the ADMIN_WORK_AREA temporary table.
Which two statements are true regarding the TBS_T1 tablespace in the above command? (Choose two.)
A. It stores only the temporary table but not its indexes.
B. It stores both the temporary table as well as its indexes.
C. It must be a nondefault temporary tablespace for the database.
D. It can be a default or nondefault temporary tablespace for the database.
E. It must be the default temporary tablespace of the user who issues the command.
Answer: BD
Oracle参考書 1Z0-055認証試験 1Z0-055 1Z0-055認定資格
NO.8 Which setting enables the baselines by default in Oracle Database 11g?
A. setting the STATISTICS_LEVEL parameter to TYPICAL
B. adding filters to the Automatic Database Diagnostic Monitor (ADDM)
C. enabling Automated Maintenance Task using Oracle Enterprise Manager
D. setting the OPTIMIZER_USE_PENDING_STATISTICS parameter to TRUE
Answer: A
Oracle認定証 1Z0-055 1Z0-055 1Z0-055
NO.9 When executing a SQL workload, you choose to generate execution plans only, without collecting
execution statistics. Which two statements describe the implications of this? (Choose two.)
A. It produces less accurate results of the comparison analysis.
B. It automatically calls the SQL Tuning Advisor for recommendations.
C. It shortens the time of execution and reduces the impact on system resources.
D. Only the changes in the execution plan, and not performance regression, are detected.
Answer: AC
Oracle認定証 1Z0-055 1Z0-055認証試験 1Z0-055認定証 1Z0-055認定証
NO.10 Identify the activities performed as part of the Automatic SQL Tuning process in the maintenance
window? (Choose all that apply.)
A. generating the SQL profile
B. testing and accepting the SQL profile
C. generating a list of candidate SQLs for tuning
D. adding tuned SQL plans into the SQL plan baseline
E. tuning each SQL statement in the order of importance
F. generating baselines that include candidate SQL statement for tuning
Answer: ABCE
Oracle 1Z0-055 1Z0-055認定証 1Z0-055
NO.11 Your system has been upgraded from Oracle Database 10g to Oracle Database 11g. You imported
SQL Tuning Sets (STS) from the previous version. After changing the OPTIMIZER_FEATURE_ENABLE
parameter to 10.2.0.4 and running the SQL Performance Analyzer, you observed performance regression
for a few SQL statements. What would you do with these SQL statements?
A. Set OPTIMIZER_USE_PLAN_BASELINES to FALSE to prevent the use of regressed plans.
B. Capture the plans from the previous version using STS and then load them into the stored outline.
C. Capture the plans from the previous version using STS and then load them into SQL Management
Base (SMB).
D. Set OPTIMIZER_CAPTURE_SQL_PLAN_BASELINES to FALSE to prevent the plans from being
loaded to the SQL plan baseline.
Answer: C
Oracle認定資格 1Z0-055 1Z0-055 1Z0-055 1Z0-055参考書 1Z0-055参考書
NO.12 View the Exhibit to examine the details for an incident.
Which statement is true regarding the status of the incident?
A. The DBA is working on the incident and prefers that the incident be kept in the ADR.
B. The incident is now in the Done state and the ADR can select the incident to be purged.
C. The incident has been newly created and is in the process of collecting diagnostic information.
D. The data collection for the incident is complete and the incident can be packaged and sent to Oracle
Support.
Answer: D
Oracle 1Z0-055 1Z0-055認定証 1Z0-055 1Z0-055 1Z0-055参考書
NO.13 View the Exhibit for the object interdependency diagram.
The PRODUCTS table is used to create the PRODCAT_VW view.
PRODCAT_VW is used in the GET_DATA procedure.
GET_DATA is called in the CHECK_DATA function.
A new column PROD_QTY is added to the PRODUCTS table.
How does this impact the status of the dependent objects?
A. All dependent objects remain valid.
B. Only the procedure and function become invalid and must be recompiled.
C. Only the view becomes invalid and gets automatically revalidated the next time it is used.
D. Only the procedure and function become invalid and get automatically revalidated the next time they
are called.
Answer: A
Oracle 1Z0-055問題集 1Z0-055認証試験 1Z0-055 1Z0-055練習問題 1Z0-055認定資格
NO.14 While deploying a new application module, the software vendor ships the application software along
with appropriate SQL plan baselines for the new SQLs being introduced. Which two statements describe
the consequences? (Choose two.)
A. The plan baselines can be evolved over time to produce better performance.
B. The newly generated plans are directly placed into the SQL plan baseline without being verified.
C. The new SQL statements initially run with the plans that are known to produce good performance
under standard test configuration.
D. The optimizer does not generate new plans for the SQL statements for which the SQL plan baseline
has been imported.
Answer: AC
Oracle認定資格 1Z0-055 1Z0-055過去問 1Z0-055
NO.15 Which two statements are true with respect to the maintenance window? (Choose two.)
A. A DBA can enable or disable an individual task in all maintenance windows.
B. A DBA cannot change the duration of the maintenance window after it is created.
C. In case of a long maintenance window, all Automated Maintenance Tasks are restarted every four
hours.
D. A DBA can control the percentage of the resource allocated to the Automated Maintenance Tasks in
each window.
Answer: AD
Oracle 1Z0-055認証試験 1Z0-055認定試験
NO.16 An online tablespace, TEST_TBS, is full and you realize that no server-managed tablespace
threshold alerts were generated for the TEST_TBS tablespace. What could be the reason, if the
TEST_TBS tablespace does not include autoextensible data files?
A. TEST_TBS is a small file tablespace.
B. TEST_TBS is a bigfile tablespace (BFT).
C. TEST_TBS is the default temporary tablespace.
D. TEST_TBS is a dictionary-managed tablespace.
Answer: D
Oracle認定試験 1Z0-055参考書 1Z0-055問題集
NO.17 You want to convert your existing non-ASM files to ASM files for the database PROD. Which method or
command would you use to accomplish this task?
A. Data Pump Export and Import
B. conventional export and import
C. the CONVERT command of RMAN
D. the BACKUP AS COPY.. command of RMAN
Answer: D
Oracle問題集 1Z0-055参考書 1Z0-055 1Z0-055
NO.18 While performing the backup of the flash recovery area, you notice that one of the archived redo log
files is missing. You have multiple destinations for archived redo log files. What implications does it have
on the backup of the flash recovery area?
A. The backup succeeds but it would be without the missing archived log.
B. The backup fails because one of the archived redo log files is missing.
C. The backup succeeds because it fails over to one of the alternative archived redo log destinations.
D. During backup, you are prompted for the alternative destination for the missing archived redo log file.
Answer: C
Oracle認定資格 1Z0-055 1Z0-055
NO.19 You performed an incomplete recovery and opened the database with the RESETLOGS option. The
LOG_ARCHIVE_FORMAT parameter is set to 'ora_%t_%s_%r.log'. Which statement regarding the
archived redo log files, created in an earlier incarnation of the database, is true?
A. The archived redo log files will be overwritten.
B. The archived redo log files are deleted automatically.
C. The archived redo log files should be moved to some other location.
D. The archived redo log files are still maintained because the file names are unique.
Answer: D
Oracle参考書 1Z0-055 1Z0-055認定試験 1Z0-055 1Z0-055 1Z0-055認定試験
NO.20 In your database, the RESULT_CACHE_MODE parameter has been set to MANUAL in the
initialization parameter file.
You issued the following command:
SQL>SELECT /*+ RESULT_CACHE */ sale_category, sum(sale_amt)
FROM sales
GROUP BY sale_category;
Where would the result of this query be stored?
A. PGA
B. large pool
C. shared pool
D. database buffer cache
Answer: C
Oracle認定証 1Z0-055認定証 1Z0-055問題集
IT-Passports.comは実環境であなたの本当のOracle 1Z0-055試験に準備するプロセスを見つけられます。もしあなたが初心者だったら、または自分の知識や専門的なスキルを高めたいのなら、IT-Passports.comのOracleの1Z0-055問題集があなたを助けることができ、一歩一歩でその念願を実現することにヘルプを差し上げます。IT-Passports.comのOracleの1Z0-055は試験に関する全ての質問が解決して差し上げられます。それに一年間の無料更新サービスを提供しますから、IT-Passports.comのウェブサイトをご覧ください。
没有评论:
发表评论