IT業種を選んだあなたは現状に自己満足することはきっとないですね。現在、どの業種の競争でも激しくなっていて、IT業種も例外ないですから、目標を立ったら勇気を持って目標を達成するために頑張るべきです。その中で、HPのHP0-P10試験に受かることも競争力があるモードです。この試験に合格したら、あなたのITキャリアには明るい未来があるようになります。あなたを助けるために、我々のIT-Passports.comは真実かつ正確なトレーニング資料を提供します。IT-Passports.comを利用したら、あなたはきっと自分の理想を実現することができます。
IT-Passports.comのHP0-P10問題集は実際のHP0-P10認定試験と同じです。この問題集は実際試験の問題をすべて含めることができるだけでなく、問題集のソフト版はHP0-P10試験の雰囲気を完全にシミュレートすることもできます。IT-Passports.comの問題集を利用してから、試験を受けるときに簡単に対処し、楽に高い点数を取ることができます。
試験番号：HP0-P10問題集
試験科目：HP 「HP Integrity Server Multi-OS Installation and Deployment」
問題と解答：全147問
HP0-P10認定試験について、あなたはどうやって思っているのですか。非常に人気があるHPの認定試験の一つとして、この試験も大切です。しかし、試験の準備をよりよくできるために試験参考書を探しているときに、優秀な参考資料を見つけるのはたいへん難しいことがわかります。では、どうしたらいいでしょうか。大丈夫ですよ。IT-Passports.comはあなたの望みを察して、受験生の皆さんの要望にこたえるために、一番良い試験HP0-P10問題集を提供してあげます。
HPの認定試験は現在とても人気がある試験ですね。この重要な認証資格をもうすでに手に入れましたか。例えば、もう既にHP0-P10認定試験を受験したのですか。もしまだ受験していないなら、はやく行動する必要がありますよ。こんなに大切な資格を取らなくてはいけないです。ここで言いたいのは、どのようにすれば効率的にHP0-P10認定試験の準備をして一回で試験に合格できるのかということです。
HPのHP0-P10認定試験に関連する知識を学んで自分のスキルを向上させ、HP0-P10認証資格を通して他人の認可を得たいですか。HPの認定試験はあなたが自分自身のレベルを高めることができます。HP0-P10認定試験の資格を取ったら、あなたがより良く仕事をすることができます。この試験が非常に困難ですが、実は試験の準備時に一生懸命である必要はありません。IT-Passports.comのHP0-P10問題集を利用してから、一回で試験に合格することができるだけでなく、試験に必要な技能を身につけることもできます。
IT-Passports.comのHPのHP0-P10試験トレーニング資料は現在で一番人気があるダウンロードのフォーマットを提供します。PDFとソフトのフォーマットで、ダウンロードするのは易いです。IT-Passports.comが提供した製品がIT専門家は実際の経験を活かして作った最も良い製品で、あなたが自分の目標を達成するようにずっと一生懸命頑張っています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/HP0-P10.html
NO.1 After you replace a memory module on an Integrity server, how do you clear the entries in the Page
Deallocation Table (PDT)?
A. Interrupt the boot, go to the Service Menu and enter pdt clear.
B. Interrupt the boot, go to the EFI shell, and then enter pdt clear.
C. Interrupt the boot, enter the MP:CM> CL command, and choose PDT.
D. After reboot, the system automatically deletes entries in the PDT without user input.
Answer: B
HP問題集 HP0-P10 HP0-P10 HP0-P10
NO.2 You need to perform a maintenance task on a Management Processor module. Which command
displays a list of connected users?
A. who
B. list
C. usmgr
D. show user
Answer: A
HP HP0-P10認定証 HP0-P10認定証 HP0-P10 HP0-P10
NO.3 An Integrity rx2620 server with Windows Server 2003 is running terminal services but has stopped
responding. Which MP command do you use to shut down gracefully and power off the server?
A. rs -g
B. pc -g
C. rs -off
D. pc -off
Answer: B
HP認定資格 HP0-P10参考書 HP0-P10参考書 HP0-P10練習問題 HP0-P10過去問
NO.4 What does an amber blinking System LED on an Integrity rx2620 indicate?
A. System is in error state
B. Remote access is enabled
C. A system warning
D. Management Processor is powered off
Answer: C
HP練習問題 HP0-P10 HP0-P10 HP0-P10認定資格 HP0-P10
NO.5 What is the difference between a Machine Check Abort (MCA) and a Transfer of Control (TOC)?
A. An MCA is a software dump; a TOC is a hardware register dump.
B. An MCA is a hardware register dump; a TOC initiates a software dump.
C. An MCA dump is for Windows systems; a TOC is for HP-UX systems.
D. An MCA dump is for HP-UX systems; a TOC is for Windows systems.
Answer: B
HP認定試験 HP0-P10認定資格 HP0-P10 HP0-P10 HP0-P10問題集
NO.6 Which front panel LEDs on an Integrity rx2620 can indicate an error?
A. Locator LED and System LED
B. Power LED and Diagnostic LEDs
C. System LED and Diagnostic LEDs
D. Diagnostic LEDs and Locator LED
Answer: C
HP HP0-P10 HP0-P10 HP0-P10 HP0-P10参考書
NO.7 Which methods of accessing the Offline Diagnostics Environment (ODE) utilities does HP recommend?
(Select two.)
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
Answer: AE
HP HP0-P10認証試験 HP0-P10
NO.8 You replaced failed hardware in an HP Integrity server. Which steps should you perform to ensure
that the system is operational?
A. Verify that the replaced hardware is visible in the EFI Shell, and that the Diagnostic LEDs are clear.
B. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded.
C. From the EFI Shell, boot the system. From within the operating system, confirm that the replaced
hardware is functioning and verify the correct status of the Diagnostic LEDs.
D. Verify that the replaced hardware is visible in the EFI Shell and that the correct firmware version is
loaded. Then boot the system and confirm that the replaced hardware is functioning.
Answer: D
HP参考書 HP0-P10 HP0-P10練習問題 HP0-P10
NO.9 Which Offline Diagnostics Environment (ODE) utility should you use to test the memory of an Integrity
server?
A. MAPPER
B. SYSDIAG
C. MEMDIAG
D. DIMMDIAG
Answer: C
HP HP0-P10 HP0-P10過去問 HP0-P10
NO.10 Where is the diagnostic panel on an Integrity rx4640 server located?
A. top
B. front
C. back
D. left side
E. right side
Answer: A
HP参考書 HP0-P10 HP0-P10 HP0-P10問題集 HP0-P10 HP0-P10参考書
NO.11 The system is not responding normally. You have access to the Management Processor (MP). Which
command do you use to cycle the power?
A. ps
B. pc
C. rs
D. co
Answer: B
HP参考書 HP0-P10認定資格 HP0-P10
NO.12 The diagnostic panel on an Integrity rx4640 shows a fan failure. What information on the Management
Processor (MP) shows you when the fan failed?
A. MP:CM> PS
B. MP:CM> SS
C. MP> SL --> L - Live Events
D. MP> SL --> E - System Event
Answer: D
HP HP0-P10問題集 HP0-P10 HP0-P10練習問題
NO.13 Where does HP OpenVMS store all error information?
A. /var/adm/syslog/syslog.log
B. SYS$ERRLOG:SYSTEM.LOG
C. SYS$ERRORLOG:ERRLOG.SYS
D. SYS$MANAGER:OPERATOR.LOG
Answer: C
HP HP0-P10認定試験 HP0-P10
NO.14 How can you determine the firmware version that is running on an HP Integrity system? (Select two.)
A. At the EFI Boot Manager menu, open the EFI shell and enter info fw.
B. At the MP main menu, open the Command Menu (cm) and enter firmware.
C. At the EFI Boot Manager menu, go to the Firmware menu and select Version.
D. At the EFI Boot Manager menu, go to the Firmware Configuration menu and select Version.
E. If you access the EFI Boot Manager menu using iLO, the firmware versions display automatically.
Answer: AE
HP HP0-P10練習問題 HP0-P10 HP0-P10認定証 HP0-P10 HP0-P10過去問
NO.15 The rx3600 and rx6600 have LEDs which show the FRU Health status. How can you view the state of
these LEDs remotely?
A. From the MP main menu, select VFP
B. From the MP main menu, select SL
C. From the MP main menu, select CM, then LS
D. From the MP main menu, select CM, then DF
Answer: A
HP問題集 HP0-P10参考書 HP0-P10認定試験 HP0-P10認定試験
NO.16 Which Offline Diagnostics Environment (ODE) utility should you use to test an HP Tachyon XL2 Fibre
Channel card?
A. IODIAG
B. FCDIAG
C. PERFVER
D. FCFUPDATE
Answer: A
HP HP0-P10 HP0-P10練習問題 HP0-P10
NO.17 You have limited access to the Management Processor (MP), but you have full access to the system
Baseboard Management Console (BMC). Which command do you issue in the BMC Command Line
Interface (CLI) to power off the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
Answer: A
HP認定証 HP0-P10過去問 HP0-P10 HP0-P10
NO.18 You must back up all your Integrity server NVRAM configurations. Which backup utility is available for
download that can be used in the EFI shell?
A. bcfg
B. getmtc
C. nvrambkp
D. bcknvram
Answer: C
HP HP0-P10 HP0-P10問題集
NO.19 You want to load new firmware for the Management Processor (MP). Which command do you use to
verify a proper connection to an FTP server?
A. xd
B. bin
C. scp
D. xu
Answer: A
HP HP0-P10認証試験 HP0-P10 HP0-P10
NO.20 Which command in the iLO 2 controls access permissions for an Integrity rx6600 server?
A. PS
B. SO
C. PC
D. SD
Answer: B
HP HP0-P10 HP0-P10 HP0-P10認定試験 HP0-P10
NO.21 Which Offline Diagnostics Environment (ODE) utility should you use to test processors on an Integrity
server?
A. WDIAG
B. IA64DIAG
C. CPUDIAG
D. PROCDIAG
Answer: C
HP HP0-P10 HP0-P10認証試験
NO.22 From the EFI Boot Manager, how can you get information about the installed memory DIMMs?
A. Go to the EFI Shell and enter: info mem
B. It is not possible to get the information offline.
C. The information displays automatically at the EFI Boot Manager menu.
D. Go to the System Configuration menu and choose Memory Configuration.
Answer: A
HP HP0-P10 HP0-P10練習問題 HP0-P10 HP0-P10 HP0-P10
NO.23 Which capability does the Management Processor (MP) in the Integrity rx2620 server provide?
A. offline hardware monitoring
B. hardware administration and management
C. remote HP-UX operating system installation
D. remote monitoring of server room conditions
Answer: B
HP HP0-P10 HP0-P10参考書 HP0-P10認定試験
NO.24 You just installed an Integrity rx2620 server. How do you set the MP and system times?
A. Use the MP date command to set time and date.
B. The time will be set automatically during system boot.
C. Use the EFI shell command time to set time and date of the MP.
D. Use the MP date command to set the date, and use the MP time command to set the time.
Answer: C
HP参考書 HP0-P10 HP0-P10認定証 HP0-P10認定資格 HP0-P10
NO.25 In a Linux environment, what is one of the components used to manage highly available solutions
offered by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Answer: C
HP認定証 HP0-P10問題集 HP0-P10問題集
NO.26 Which Management Processor (MP) command displays the physical location information of the
system?
A. SI
B. ID
C. LOC
D. SO
Answer: B
HP認証試験 HP0-P10練習問題 HP0-P10
NO.27 You are managing an Integrity rx2620 server that is located in a remote office. Which Management
Processor (MP) console command do you use to gather the state of the system and LEDs?
A. LED
B. VFP
C. ERRDUMP D. SYSSTAT
Answer: B
HP HP0-P10 HP0-P10
NO.28 Which command do you use in the EFI Shell to verify that an Integrity rx4640 server has the latest
firmware?
A. openinfo fw
B. info fw
C. ver fw
D. sysrev
Answer: B
HP認証試験 HP0-P10 HP0-P10認証試験 HP0-P10認定証
NO.29 How can you access the UUID on an entry-level HP Integrity server? (Select two.)
A. The UUID is written on the system information label of the server.
B. At the EFI Boot Manager menu, access the EFI Shell; then enter info sys.
C. At the Management Processor (MP) main menu, go to the Command Menu and enter id.
D. At the EFI Boot Manager menu, access the System Configuration menu and select System UUID.
E. If you access the EFI Boot Manager menu using integrated Lights-Out (iLO), the UUID displays
automatically.
Answer: AB
HP認定証 HP0-P10過去問 HP0-P10過去問 HP0-P10認定試験 HP0-P10認定資格 HP0-P10認証試験
NO.30 You have run an Offline Diagnostics Environment (ODE) utility. What should you do before booting
the operating system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the DC voltage.
C. Reset the system at the EFI shell prompt and disconnect the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
Answer: A
HP HP0-P10 HP0-P10参考書
難しいHP0-P10認定試験に合格したいなら、試験の準備をするときに関連する参考書を使わないとダメです。自分に合っている優秀な参考資料がほしいとしたら、一番来るべき場所はIT-Passports.comです。IT-Passports.comの知名度が高くて、IT認定試験に関連するいろいろな優秀な問題集を持っています。それに、すべてのHP0-P10試験問題集に対する無料なdemoがあります。IT-Passports.comのHP0-P10問題集があなたに適するかどうかを確認したいなら、まず問題集のデモをダウンロードして体験してください。
没有评论:
发表评论