IT-Passports.comはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はIT-Passports.comが最高の知識源サイトと比較しますた。IT-Passports.comの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。
1Z0-478試験は簡単ではありません。専門的な知識が必要で、もしあなたはまだこの方面の知識を欠かれば、IT-Passports.comは君に向ける知識を提供いたします。IT-Passports.comの専門家チームは彼らの知識や経験を利用してあなたの知識を広めることを助けています。そしてあなたに1Z0-478試験に関するテスト問題と解答が分析して差し上げるうちにあなたのIT専門知識を固めています。
偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。IT-Passports.comはあなたがOracleの1Z0-478認定試験に合格する確保です。IT-Passports.com のトレーニング試験は問題と解答に含まれています。しかも１００パーセントの合格率を保証できます。IT-Passports.comのOracleの1Z0-478試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。
試験番号：1Z0-478問題集
試験科目：Oracle 「Oracle SOA Suite 11g Essentials」
問題と解答：全75問
成功した方法を見つけるだけで、失敗の言い訳をしないでください。Oracleの1Z0-478試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのOracleの1Z0-478試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
あなたの人生に残念と後悔を残しないように、私たちはできるだけ人生を変えるあらゆるチャンスをつかむ必要があります。あなたはそれをやったことができましたか。IT-Passports.comのOracleの1Z0-478試験トレーニング資料は成功したいIT職員のために作成されたのです。あなたがOracleの1Z0-478認定試験に合格することを助けます。成功と擦れ違うことを避けるように速く行動しましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/1Z0-478.html
NO.1 Identify two correct descriptions of Oracle Web Services Manager (OWSM).
A. It enables you to externalize web services security from the applications youbuild.
B. It manages policies in a distributed policy manager that serves as a single policy enforcement
point.
C. Use security and management events, captured by OWSM agents, are displayed using Oracle
BAM.
D. It supplies predefined security policies that enable declarative security and management
definition.
E. It uses Oracle Event Processing (OEP) to determine when security violations have occurred.
Answer: B,C
Oracle 1Z0-478認定資格 1Z0-478認定資格 1Z0-478
Explanation:
Note: *Oracle WSM allows companies to (1) centrally define and store declarative policies applied
to the multiple web services making up a SOA infrastructure, (2) locally enforce security and
management policies through configurable agents, and (3) monitor runtime security events such as
failed authentication or authorization.
*Oracle Web Services Manager offers a comprehensive and easy-to-use solution for policy
management and security of service infrastructure. It provides visibility and control of the policies
through a centralized administration interface offered by Oracle Enterprise Manager.
NO.2 A partner needs to access services that are defined in one of your Service Composite
Architecture (SCA) applications via a web service interface. Which approach (and accompanying
reasoning) describes a loosely coupled and robust solution?
A. Use Oracle Service Bus to provide an Interface layer over your SCA application. This enables you
to hide the locations of your SCA application, perform load-balancing across those endpoints, and
provide the ability to define service level agreements to help ensure that you are meeting your
contractual obligations to the partner.
B. Use the Mediator component to provide a web service interface to your SCA application. This
arrives you the flexibility of using the industry standard XSLT technology to perform translation and
transformations.
C. Use Oracle Service Bus to provide an interface layer over your SCA application. This enables you
to "skin" your SCA application with a web service interface and still provide a robust experience to
the partner.
D. Allow the partner simply to connect directly to the SCA application. This provides the best
performance and helps keep the partner happy.
Answer: B
Oracle 1Z0-478認証試験 1Z0-478 1Z0-478
NO.3 Which two approaches are valid when using dynamic partner links in a BPEL process?
A. A WSDL file, which contains multiple services that use the same portType, is available at design
time, but the decision to determine which service is used can only be made at runtime.
B. When the BPEL process is designed, the endpoint URL of the WSDL file is known but the services
and port types are not known.
C. When the BPEL process is designed, the services and port types of the WSDL file are known but
the endpoint URI is not known.
D. A WSDL file, which contains multiple services that use different portTypes, is available at design
time, but the decision to determine which server us used can only be made at runtime.
Answer: A,C
Oracle認定証 1Z0-478参考書 1Z0-478 1Z0-478 1Z0-478
Explanation:
A (not D):How To Create a Dynamic Partner Link at Design Time for Use at Runtime
To create a dynamic partner link at design time for use at runtime:
etc
C (not B):The BPEL specification mandates that only the partner endpoint reference (EPR) can be
changed dynamically. In BPEL terms, only the partnerRole of a partner link element can have a new
value assigned. The myRole value doesn't change after the BPEL has been deployed.
Note: *Dynamic Partner Links and Dynamic Addressing During the design-time of an application,
you may need to configure certain services whose endpoints (addresses) are not known beforehand,
or it may be necessary to change an endpoint reference while the application is running. The
Dynamic Partner link feature allows you to dynamically assign an endpoint reference to the partner
link. This means that you can use onepartner link for subsequent calls to different web-services
(provided that the services use the same interface). *For successful deployment of the process, a
partner link should be completely defined. When you deploy the project, the WSDL file for the
partner link should contain and define both the abstract and the concrete information for the
partner link, including address and port, though later the concrete information can be changed
independently from the WSDL file.
NO.4 In your solution, a web service client needs to invoke a series of three web services in support
of a single transaction. The third web service needs the identity of the original web service client.
Which statement describes how the identity is made available by Oracle Web Services Manager
(OWSM)?
A. The transaction manager accesses an internal table that maintains credentials used to invoke
each individual web service in the chain.
B. Each web service in the chain does its own authentication so the third web service handles its
own identity checking.
C. OWSM sets the user in the Java Authentication and Authorization (JAAS) Subject when the first
web service successfully authenticates, and the Java Subject is used by subsequent web services to
access the identity.
D. OWSM stores a SAML token from the first web service invocation in a database table, and that
table is accessed by subsequent web services in the chain to retrieve identity.
Answer: D
Oracle 1Z0-478練習問題 1Z0-478問題集 1Z0-478認定資格
Explanation:
Oracle Web Services Manager is a component of the Oracle Enterprise Manager Fusion Middleware
Control, a run-time framework that provides centralized management and governance of Oracle
SOA Suite environments and applications. You create and configureOracle Web Services Manager
policies in Oracle Enterprise Manager, and those policies are persisted in a policy store (a database
is recommended). Oracle Web Services Manager lets you define policies against an LDAP directory
and generate standard security tokens (such as SAML tokens) to propagate identities across multiple
Web services used in a single transaction.
NO.5 Composite X invokes an outbound DB adapter to write data to a database table. You have
configured JCA at the binding component as follows:
<property name = "jca.retry.count" type = "xs:int" many = "false" override = "may" > 2</property>
<property name = "jca.retry.interval" type = "xs:int" many = "false" override = "may" > 2</property>
You have also modeled a modeled a fault policy to retry the invocation three times in case of
remoteFault as follows:
<retryCount>3<retryCount>
<retryInterval>3<retryInterval>
Which result describes what happens when the database that is being accessed by the above
binding component goes down?
A. The invocation is retrieved for a total of two times every two seconds. Fault policy retries are
ignored.
B. The invocation is retried for a total of six times every three seconds.
C. The invocation is retried for a total of six times every two seconds.
D. The fault policy retries occur within the JCA retries. So two JCA retries are executed two seconds
apart. Within each JCA retry, three fault policy retries are executed three seconds apart.
E. The JCA retries occur within the fault policy retries. So three fault policy retries are executed
three seconds apart. Within each fault policy retry, two JCA retries are executed two seconds apart.
Answer: E
Oracle 1Z0-478 1Z0-478問題集 1Z0-478参考書
Explanation:
Note: *Global retries for any error handling are returned to the BPEL Receive activity instance, for
example, or, more generally, to the point at which the transaction started. Such a retry could occur
if there was an error such as a temporary database fault. The default retry count is by default
indefinite, or specified in the jca.retry.count property.
*Properties you can specify in the composite.xml file include:
/jca.retry.count
Specifies the maximum number of retries before rejection. Again, specifying this value is a pre-
requisite to specifying the other property values.
/jca.retry.interval
Specifies the time interval between retries (measured in seconds.)
*A remoteFault is also thrown inside an activity. It is thrown because the invocation fails. For
example, a SOAP fault is returned by the remote service.
NO.6 When more than one policy is attached to a policy subject, the combination of policies needs
to be valid. Which statement is true about the valid combination of policies for a policy subject?
A. Only one MTOM policy can be attached to a policy subject.
B. More than one Reliable Messaging policy can be attached to a policy subject.
C. Both a Reliable Messaging policy and a WS-Addressing policy cannot be attached to the same
policy subject.
D. Only one security policy can be attached to a policy subject.
Answer: A
Oracle 1Z0-478 1Z0-478 1Z0-478
Explanation:
Note:
*Within a SOA composite application, you must attach the Oracle WS-MTOM policy to service and
reference binding components to receive and send MTOM (MIME binary) attachments within
Oracle SOA Suite.
*Message Transmission Optimization Mechanism (MTOM)
Ensures that attachments are in MTOM format. This format enables binary data to be sent to and
from web services. This reduces the transmission size on the wire.
*ReliabilityPolicy
Supports the WS-Reliable Messaging protocol. This guarantees the end-to-end delivery of
messages.
* Addressing Policy Verifies that simple object access protocol (SOAP) messages include
WS-Addressing headers in conformance with the WS-Addressing specification. Transport-level data
is included in the XML message rather than relying on the network-level transport to convey this
information.
NO.7 Identify two features of Oracle BAM.
A. Enterprise Manager's monitoring capabilities are central to Oracle BAM's ability to monitor
performance indicators.
B. You can analyze and present Information from activities spanning multiple systems and
applications.
C. Rich browser-based dashboards provide visibility into current values of key performance
indicators (KPIs).
D. There is a built-in trouble ticket system to track assignment and completion of corrective actions.
Answer: A,C
Oracle認定資格 1Z0-478 1Z0-478 1Z0-478 1Z0-478過去問
Explanation:
Note: *Oracle Business Activity Monitoring (Oracle BAM) gives business executives the ability to
monitor their business services and processes in the enterprise, to correlate KPIs down to the actual
business process themselves, and most important, to change business processes quickly or to take
corrective action if the business environment changes.
NO.8 Which two features are provided by decision tables?
A. Sets of input data can be bucketed and reviewed for gaps.
B. Data sets can be reviewed for conflicts.
C. Data can be used for only one rule evaluation.
D. A rule evaluation can be used only to enter new output data.
Answer: A,B
Oracle認定試験 1Z0-478 1Z0-478 1Z0-478認定試験
Explanation:
After you create a Decision Table there are operations that you may want to perform on the
Decision Table, including the following:
(A)Find and fix gaps in a Decision Table (B)Finding and resolving conflicts between rules in a
Decision Table Compact or split cells in a Decision Table Merge a condition or split a condition in a
Decision Table
A: *Compact the Decision Table
In this step you compact the rules to merge from eighteen rules to nine rules. This automatically
eliminates the rules that are not needed and preserves the no gap, no conflict properties for the
Decision Table.
*The Conditions area in a Decision Table includes one or more condition rows. Each condition row
has a condition expression and, for each rule, a condition cell. A condition expression is an
expression that you build in Rules Designer. The condition expression is often a fact property or a
function result, but it can be any expression that has a type that can be associated with a bucketset.
B:A Decision Table displays multiple related rules in a single spreadsheet-style view. In Rules
Designer a Decision Table presents a collection of related business rules with condition rows, rules,
and actions presented in a tabular form that is easy to understand. Business users can compare cells
and their values at a glance and can use Decision Table rule analysis features by clicking icons and
selecting values in Rules Designer to help identify and correct conflicting or missing cases.
NO.9 You expand a business rule component that a colleague added to the BPEL process. You see an
Assign element named Facts_To_Rule_Service.
Which statement is true bout this Assign element?
A. It was added automatically based on entries that your colleague made in the dialog box that
approved when the business rule component was added to the BPEL model.
B. Your colleague manually added this Assign element after adding the business rule component to
the BPEL Model.
C. This Assign element was automatically added when your colleague manually addedthe
corresponding Rule_Service_To_Facts assign to the BPEL model.
D. You can delete this Assign because it was created for documentation purposes only.
Answer: A
Oracle過去問 1Z0-478 1Z0-478 1Z0-478認定資格
Explanation:
Note: *Facts_To_Rule_Service: Assigns the facts to a variable.
IT-Passports.comはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がIT-Passports.comの問題集を使うので試験に合格しますた。彼らはIT-Passports.comの問題集が有効なこと確認しました。IT-Passports.comが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
没有评论:
发表评论