IT-Passports.comの000-221問題集はあなたの一発合格を保証できる資料です。問題集の的中率はとても高いですから、この問題集だけで試験に合格することができます。信じられなら利用してみてください。不合格になればIT-Passports.comは全額返金のことができますから、絶対損にならないです。利用したら000-221問題集の品質がわかるようになるので、まず問題集の無料なサンプルを試しましょう。問題集のdemoが無料で提供されますから、IT-Passports.comのサイトをクリックしてダウンロードしてください。
現在の社会で人材があちこちいます。IT領域でも同じです。コンピュータの普及につれて、パソコンを使えない人がほとんどいなくなります。ですから、IT業界で勤めているあなたはプレッシャーを感じていませんか。学歴はどんなに高くてもあなたの実力を代表できません。学歴はただ踏み台だけで、あなたの地位を確保できる礎は実力です。IT職員としているあなたがどうやって自分自身の実力を養うのですか。IT認定試験を受験するのは一つの良い方法です。000-221試験を通して、あなたは新しいスキルをマスターすることができるだけでなく、000-221認証資格を取得して自分の高い能力を証明することもできます。最近、IBM 000-221試験の認証資格がとても人気があるようになりましたが、受験したいですか。
試験番号：000-221問題集
試験科目：IBM 「AIX 7 Administration 」
問題と解答：全229問
成功した方法を見つけるだけで、失敗の言い訳をしないでください。IBMの000-221試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのIBMの000-221試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
IT-Passports.comは我々が研究したトレーニング資料を無料に更新します。それはあなたがいつでも最新の000-221試験トレーニング資料をもらえるということです。000-221認定試験の目標が変更されば、IT-Passports.comが提供した勉強資料も変化に追従して内容を変えます。IT-Passports.com は各受験生のニーズを知っていて、あなたが000-221認定試験に受かることに有効なヘルプを差し上げます。あなたが首尾よく試験に合格するように、我々は最も有利な価格と最高のクオリティーを提供して差し上げます。
IT-Passports.comはIBMの000-221認定試験に対して問題集を提供しておるサイトで、現場のIBMの000-221試験問題と模擬試験問題集を含みます。ほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。
IBMの000-221の認証試験は現在IT業界でもっとも人気があって、その試験に合格すれば君の生活と仕事にいいです。 IT-Passports.comはIBMの000-221の認証試験の合格率を高めるのウエブサイトで、IT-Passports.com中のIT業界の専門家が研究を通じてIBMの000-221の認証試験について問題集を研究し続けています。100%合格率は彼らの研究成果でございます。IT-Passports.comを選られば、成功しましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/000-221.html
NO.1 Which TWO groups of actions will create a CDROM file system for device cd0 and mount this on /cdfs?
(Select 2)
A. cdutil-s-kcd0/cdfs mount /cdfs
B. Define cd0 mount point as /cdfs in file /etc/cdromd.conf startsrc -s cdromd cdmount cd0
C. Define cd0 mount point as /cdfs in /etc/filesystems as vfs type jfs2 mount /cdfs
D. crfs-vcdrfs-pro-d'cd0'-mVcdfs' mount /cdfs
E. mkfs-v/cdfs/dev/cd0 mount /cdfs
Answer: B,D
IBM 000-221認定資格 000-221参考書 000-221認定証
NO.2 An administrator plans to duplicate the active rootvg on a given system to a spare disk that will be
migrated to newer hardware. Which flag on 'alt_disk_copy' must be used to reset user-defined device
configurations to defaults?
A. X
B. R
C. O
D. D
Answer: C
IBM 000-221認定資格 000-221 000-221問題集 000-221
NO.3 New change control procedures dictate that system maintenance windows be shown to each user after
logging into the system using ssh or telnet. Updating which file or files will accomplish this task?
A. The message of the day file
B. The user default attributes file
C. User and admin system alert files
D. The var daily message files
Answer: A
IBM練習問題 000-221過去問 000-221 000-221 000-221
NO.4 An administrator needs to list/query the security attributes for the WPAR syswpar1. Which command
will do this?
A. Issecattr-W syswpar1
B. Issecconf-w syswpar1
C. Isattr-s syswpar1
D. Iswpar-S syswpar1
Answer: D
IBM認定証 000-221問題集 000-221 000-221過去問
NO.5 What is the difference between deferred and concurrent firmware updates.?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal program
load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred firmware can
be loaded on each LPAR at a different time and only becomes active when the LPAR is shutdown and
restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will automatically
shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware contains
major fixes to the service processor.
Answer: A
IBM認定試験 000-221過去問 000-221 000-221認定資格 000-221認証試験
NO.6 What are key considerations when planning for Live Application Mobility?
A. The WPAR is an Application WPAR and both global environments are at the same AIX level
B. That the WPAR is checkpointable and both global environments are on the same subnet
C. The NFS services are running and applications are stopped
D. The NFS services are running and there is an HMC attached to both managed systems
Answer: B
IBM練習問題 000-221認定資格 000-221認定資格
NO.7 Which technology provides the maximum amount of usable storage and resilience for a system with 6
physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C
IBM 000-221 000-221 000-221 000-221
NO.8 Which of the following is an AIX 7 Cluster Aware feature?
A. Cluster application load balancing
B. Cluster shared volume groups on the shared disk
C. Cluster IP addresses on the shared resource
D. Cluster configurations on the cluster repository disk
Answer: D
IBM 000-221 000-221 000-221認証試験 000-221
NO.9 What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up as a 'Mover Service Partition ¯:.
Answer: A
IBM 000-221 000-221 000-221参考書
NO.10 What option will boot an LPAR directly from DVD media, without any user interaction required, when
starting the LPAR from the Hardware Management Console (HMC)?
A. Normal
B. Diagnostic with default boot list
C. System management services
D. Open firmware OK prompt
Answer: B
IBM練習問題 000-221 000-221 000-221認定資格
NO.11 After performing a NIM rte install, the administrator noticed that not all filesets are at the correct
Technology Level (TL). What action will help the administrator determine why the inconsistent fileset
levels were installed?
A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.
B. On the NIM client, run oslevel command against the TL to identify missing prerequisites.
C. Run instfix command on NIM client to determine what filesets are inconsistent.
D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the
lpp_source.
Answer: D
IBM過去問 000-221練習問題 000-221 000-221問題集 000-221認定試験 000-221
NO.12 Before changing virtual memory settings, how can an administrator check the valid range of values for
a tuning parameter?
A. Iscfg-T
B. Isattr-R
C. vmtune-l
D. vmo-L
Answer: D
IBM認定試験 000-221認証試験 000-221認定試験 000-221 000-221
NO.13 An LPAR is configured with strict logical volume mirroring across two disks for resilience. The
administrator would like to ensure if one disk fails the volume group stays online. Which command will
ensure that the datavg volume group stays online?
A. varyonvg -n datavg
B. mirrorvg-Q-c 2 datavg
C. mklvcopy -e m -s y (each logical volume name) 2
D. chvg -Qn datavg
Answer: D
IBM 000-221 000-221問題集
NO.14 The following information has been reported in an AIX error log:
How can the administrator prevent the error from reoccurring?
A. Create a secondary dump device greater than 266MB
B. Increase primary dump device size greater than 266MB
C. Increase /var" file system to ensure it has a minimum of 266MB free space
D. Increase "/var/adm/ras/livedump" file system to ensure it has a minimum of 266MB free space
Answer: C
IBM 000-221 000-221参考書
NO.15 How can an administrator disable Role Based Access Control (RBAC) in a WPAR?
A. Run chattr -E -I sys0 -a enhanced_RBAC=false Reboot the WPAR
B. Run the RBAC wizard and deselect 'Enable RBAC Reboot the system
C. Run chdev -I mywpar -a enhanced_RBAC=false Reboot the Global Environment
D. Run chwpar -a RBAC=false Reboot the WPAR
Answer: C
IBM練習問題 000-221認定資格 000-221 000-221 000-221
NO.16 Which AIX command will display the virtual SCSI slot number that is the parent of hdisk0?
A. Isdev
B. Iscfg
C. Isattr
D. Ismap
Answer: B
IBM認定試験 000-221 000-221練習問題
NO.17 AIX has been installed on an LPAR with 32 GB of memory. What should be checked first, before
increasing the paging space beyond the default 512MB?
A. The maximum memory attribute in the LPAR profile.
B. Quantity and size of hosted filesystems.
C. Disk device distribution and utilization.
D. Paging requirements of applications that will be hosted.
Answer: D
IBM認定証 000-221 000-221練習問題 000-221
NO.18 A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the
administrator is trying to determine why it cannot be used to reach any other system on the network. He
suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the adapter
is using.
Answer: C
IBM参考書 000-221過去問 000-221 000-221 000-221
NO.19 The cfgmgr command appears to be taking an excessive time to complete. The administrator was able
to quit the command and return to the command prompt. The administrator does not have access to the
managing HMC and unable to check for any LED codes.
How else can the cause of the observed delay be determined?
A. Review the latest entry within /var/log/cfgdb.out.
B. Start the syslog daemon before re-issuing the command.
C. Re-issue the command with the W flag.
D. Initiate the ledmon command from a separate session, then re-issue cfgmgr.
Answer: C
IBM練習問題 000-221 000-221認証試験 000-221
NO.20 How can an administrator enable the Workload Partitions Manager feature after AIX 7 has been
installed with the default options?
A. Change AIX License using chlicense -I command
B. Change AIX edition using chedition -e command
C. Change WPAR License using chwpar -I command
D. Change WPAR edition using chwpar-e command
Answer: B
IBM 000-221 000-221 000-221
IT-Passports.comはIBMの000-221認定試験にたいして短期で有効なウェブサイトで000-221認定試験に合格するのを保証したり、IBM認証試験に合格しなければ全額で返金いたします。あなたはIT-Passports.comが提供した000-221の認証試験の問題集を購入するの前にインターネットで無料な試用版をダウンロードしてください。
没有评论:
发表评论